In simple terms, a motorcycle clutch is a connecting device that can separate or combine "between the engine and the gearbox". The motorcycle Clutch is installed between the engine crankshaft and the transmission, and its function is to enable the engine to engage the transmission smoothly and transmit power to the transmission.

The role of motorcycle Clutch. Before the motorcycle starts, although the engine is running, the transmission parts and the whole vehicle are in a static state. If the high-speed engine torque is transmitted to the transmission at once, it will cause the motorcycle to rush forward suddenly, which will cause the engine to stall due to the sudden increase in the load, and may cause serious impact and damage to various parts. Therefore, a clutch is installed in the transmission system of the motorcycle, so that when the motorcycle starts, the power of the engine is transmitted to the transmission parts stably.
When power is not needed, the motorcycle clutch can quickly disconnect the connection between the engine and the transmission, so that the engine power is not transmitted to the transmission. During driving, due to road and traffic conditions, it is often necessary to constantly change the driving speed and shift gears. At this time, the power connection between the engine and the drive train must be cut off, so that a pair of tightly meshed gears in the transmission can be separated, and then another pair of gears can be meshed to change the driving speed.
The shifting operation is done in a very short time, so the motorcycle Clutch is required to cut off the power output in a very short time. In addition, during emergency braking, the clutch can also be used to quickly cut off the connection between the engine and the drive train, so as to avoid the engine being suddenly impacted by a heavy load.
Through the above introduction and analysis of the motorcycle Clutch, hope it helps you.